02 9543 7377


The EconoTrace® Parallel Solid Phase Extraction System is an automated One-Step Extraction and Concentration System is designed to streamline your workflow and increase productivity by automating the manual steps in your sample preparation process. The EconoTrace® Parallel Solid Phase Extraction System uses consistent reproducible positive pressure pumping to replace older manual Liquid-Liquid Extraction techniques, automates existing manual SPE methods and outdated semi-automated instruments.

Product Category: SPE Systems

Industry: Analytical and Environmental Labs, Food, Dairy and Wine

Supplier: FMS


The EconoTrace® Parallel SPE System is designed to streamline your laboratory’s workflow and increase productivity by automating the manual steps in your sample preparation process. The EconoTrace Parallel SPE system automates existing manual SPE techniques and replaces older manual Liquid-Liquid Extraction techniques and outdated semi-automated instruments.

The EconoTrace Parallel SPE system  combines extraction, drying and concentration into one step, providing a truly automated total sample prep solution for the laboratory.  Load samples onto the EconoTrace Parallel SPE system and start the automated extraction process. After loading the sample onto the SPE cartridge at the programmed flow rate, the drying step is accomplished using Nitrogen. This drying step replaces manual techniques. The analytes of interest are then eluted directly to the SuperVap Concentrator where the concentration process automatically brings the extract to final volume in an autosampler vial, ready for final analysis.  Automating these processes into one step ensures the highest quality results in the shortest amount of time and eliminates both loss of compounds of interest from human error and the possibility of contamination.

Low Cost System for Drinking Water and Clean Matrices
It is a Modular System that can Expand from 1 to 4 Modules to meet the laboratories needs
Runs 2 Samples in Parallel per Module
Runs up to 8 Samples in Parallel

Reduces Errors and Costs
One-Step Automated SPE and Concentration eliminates human error, saves labor costs and reduces solvent usage while increasing your sample throughput
Eliminates Glassware
Separates Aqueous from Organic Waste

Fully Automated
Hyphenates the entire sample prep process: extraction, drying and concentration steps into a one process.
Runs up to eight samples simultaneously
Automatic sample bottle rinse
Concentrates samples up to 250ml directly to a GC vial

High Speed
The fastest automated Positive Pressure sample processing available for SPE cartridges and columns of all sizesPositive pressure pumping for fast, simultaneous loading of samples
Positive pressure pumping for fast simultaneous loading of samples

Handles a wide range of sample sizes and all matrix types
Sample Sizes 2 mL to 8 L
Expandable from 1 to 4 modules, 2 samples per module

Uses all SPE cartridge and column sizes
Positive pressure pumping for loading samples
Nitrogen drying

Complies with existing methods that require positive pressure pumping for the precise delivery of sample and solvents
Dispenses up to six solvents using an HPLC pump to deliver precise volumes and flow rates for sample loading, conditioning and elution

Easy Documentation
Programs and stores an unlimited number of methods and runs on an SD Card
Easy method transfer
Easy-to-use touch screen



15”W x 18”D x 28”H



Gas Requirements:         

Nitrogen – 20 PSI minimum


Piston Displacement Flow

Flow rate: 0.2 to 15ml/minute

Electrical Input:

110/220Volts, 50/60HZ


Integrated Touch Screen Control

Scientific Solutions

Scientific Solutions have been providing carefully selected laboratory and analytical equipment to Australian Industries such as Environmental, Pharmaceutical, Food and Beverage and Research markets of the Science Industry for over a decade.

Please enter your name.
Please enter a message.