Product Category: SPE Systems
The TurboTrace® ABN SPE system is the only SPE system that combines Dual Cartridge extraction and fractionation, drying and concentration into one step — providing a truly automated total sample prep solution for the laboratory. Simply load samples onto the TurboTrace ABN SPE system to trigger the automated extraction process. After loading the sample onto the SPE cartridge, the drying step is accomplished using Nitrogen. This drying step replaces manual techniques. The analytes of interest are then eluted directly to the SuperVap Concentrator where the concentration process automatically brings the extract to final volume and places it directly into an autosampler vial, ready for final analysis. Automating these processes into one step ensures the highest quality results in the shortest amount of time and eliminates both human error and the possibility of contamination. The fullprocess is complete in just over 1 hour versus 16 to 18 hrs and cuts the solvent consumption by 70%.
The TurboTrace ABN SPE system uses positive pressure pumping for precise and accurate delivery of conditioning, washing and elution solvents. The TurboTrace ABN SPE system is specifically designed to isolate analytes of interest from a wide variety of liquid matrices such as urine, blood, water, milk, beverages. Sample sizes range from 2 mL to 8 L and use the same bottle the sample was collected in. Sample loading rates are programmable. A vacuum or positive pressure pump is used to load samples onto the SPE cartridges and columns at unprecedented speeds and it easily handles both clean and tough sample matrices. The TurboTrace ABN SPE system concentrates samples up to 250 mL directly to a GC vial. The Sample Processing Module is designed to use all standard formats of SPE cartridges and columns on the market today. For guaranteed results, especially when dealing with low limits of detection, we recommend FMS prepacked columns and cartridges. Sample Processing Modules can be easily swapped out to perform cleanup column chemistries allowing the lab to multipurpose the TurboTrace ABN SPE system to automate other sample prep processes.
The TurboTrace ABN SPE system is a Multi Cartridge, Multi fractionation system that can be used for any SPE method requiring more than one cartridge or fraction.
One-step automated SPE and concentration eliminates human error, saves labor costs and reduces solvent usage while increasing your sample throughput
Hyphenates the entire sample prep process–extraction, drying and concentration steps–into a one step program.
Runs up to 8 samples, simultaneously
Sample Liquid Level Sensor to detect when the Sample has finished loading Automatic Sample bottle rinse
Concentrates samples up to 250 mL directly to a GC vial
Waste liquid level sensor to prevent waste overflow
Dual Cartridge extraction and fractionation of Acid/Base/Neutral
The fastest automated sample processing available for ABN methods using SPE cartridges and columns ready for analysis in hours versus days
Run up to eight samples simultaneously
Vacuum for fast loading of large volume samples
Handles a wide range of sample sizes and all matrix types
Dual Cartridge allows for many other types of multi cartridge applications
Up to 3 fractions per run
Sample Sizes 2 mL to many liters
Sample Liquid Level Sensor to detect when the Sample has finished loading
Expandable from 1 to 8 modules
Uses all SPE cartridge and column sizes
Positive pressure pumping for loading small volume samples
Complies with existing methods that require vacuum, positive pressure pumping for the precise delivery of sample and solvents
Dispenses up to six solvents using an HPLC pump to deliver precise volumes and flow rates for conditioning and elution
Programs and stores an unlimited number of methods and runs on an SD Card Easy method transfer
15”W x 18”D x 35”H
Nitrogen – 20PSI minimum
0.2 to 15ml/minute
110/220 Volts, 50/60HZ
Integrated Touch Screen Control