CALL US

02 9543 7377

Gamry > Potentiostats

Bipotentiostat

Gamry’s bipotentiostat setup is simply the best possible bipotentiostat for rotating ring-disc or scanning electrochemical microscopy experiments.  The two channels in a Gamry bipotentiostat are two fully-functional potentiostats whose timing has been synchronized.  This means that in addition to acting as a bipotentiostat you also have two fully independent potentiostats that can be separated when…

Read More

EIS Box

Make impedance measurements on up to eight batteries The EIS Box™ is a multiplexed eight channel instrument designed for impedance measurements on batteries (or other devices such as supercapacitors or fuel cells) and is typically used in conjunction with a battery cycler.  It is isolated from ground and is capable of EIS from 100 kHz…

Read More

DigiElch Electrochemical Simulation Software

DigiElch 8 from ElchSoft is an electrochemical simulation program for a wide variety of systems involving charge transfer reactions, adsorption, and charge-coupled chemical reactions such as proton-coupled electron-transfer (PCET).  A demonstration version of DigiElch 8 is available. A no-cost, two-week demo of DigiElch electrochemical simulation software is available by filling out the form.

Read More

eQCM-I Mini Quartz Crystal Microbalance with Impedance Measurement and Dissipation (QCM-D)

The eQCM-I MiniTMQuartz Crystal Microbalance is a high-sensitivity mass sensor which measures the change in frequency and dissipation of a quartz crystal resonator and any adsorbed film.  eQCMs are useful in any number of applications because you combine electrochemical measurements with mass measurments to gain further insight into what drives mass changes (and elasticity changes) within…

Read More

QCM-I Mini Quartz Crystal Microbalance with Dissipation and Impedance Measurement (QCM-D)

The QCM-I MiniTM Quartz Crystal Microbalance is a high-sensitivity mass sensor which measures the change in frequency and dissipation of a quartz crystal resonator and any adsorbed film.  QCMs are useful in any number of applications – biosensors, chemical sensors, corrosion, polymer films, nanoparticle films, etc. Changes in frequency as well as dissipation give information relating to…

Read More

Reference 3000 With Auxiliary Electrometer

The Reference 3000AE™ with Auxiliary Electrometer,  is a high-performance Potentiostat/Galvanostat/ZRA just like the Reference 3000 but the Reference 3000 AE features eight additional electrometers and is the ideal potentiostat for battery, capacitor, and fuel cell development. Key features include: Eight additional voltage measurements – Ideal for stack testing Maximum Applied Potential – Up to +/-32V@+/-1.5A or +/-15V@+/-3A…

Read More

Multichannel Potentiostat

Gamry’s multichannel potentiostat systems combine multiple research-grade instruments into a single, flexible system. This flexibility gives you the ability to run each channel separately, in groups, or all at once. Contact us to find out what options are available. Applications include: Coatings Analysis Microbial Fuel Cells Large Scale Supercapacitor and Battery Evaluation Continuous Corrosion Monitoring Monitoring Electrode…

Read More

Interface 1010B

The Interface 1010B™ is a general purpose potentiostat that gives you the ability to run basic physical and electroanalytical techniques such as cyclic voltammetry, chronoamperometry, chronopotentiometry, pulse voltammetry and square wave voltammetry. Key features include: Maximum Current – ±1 A Maximum Applied Potential – ±12 V EIS – 10 μHz – 20 kHz For techniques including: Physical Electrochemistry Pulse Voltammetry…

Read More

Interface 5000P

The Interface 5000P™ is a galvanostat designed for single-cell testing of batteries, fuel cells or any other energy device.  It can perform charge, discharge, cyclic charge discharge, read cell voltage, self-discharge, and leakage rate. Key features include: Dual Electrometer Maximum Applied Potential – ±6 V Maximum Current – +/- 5A Galvanostatic EIS – 10 μHz – 20 kHz For techniques including: Electrochemical…

Read More

Interface 5000E

Interface 5000E Potentiostat The Interface 5000E potentiostat is designed for cell-level testing of various energy storage and conversion devices and includes capabilities for monitoring both half cell voltages in addition to the whole cell voltage during an experiment. Dual Electrometer A second electrometer gives you the ability to monitor both half cells in a typical…

Read More

Scientific Solutions

Scientific Solutions have been providing carefully selected laboratory and analytical equipment to Australian Industries such as Environmental, Pharmaceutical, Food and Beverage and Research markets of the Science Industry for over a decade.

Please enter your name.
Please enter a message.